|
|  |
|
|
The model 200A is the most rugged, time proven design in the industry. Constructed of non corrosive, environmentally friendly materials, the 200A mounts easily to any flat surface using two toggle bolts (supplied). Available in single or double flash, standard or high power, the 200A will give years of trouble free service providing superior warning characteristics in all weather conditions.
SAE J1318 class 2/3 single flash
SAE J1318 class 1/2/3 double & quad flash
The model 200C, designed for the automotive market, uses the same dependable components that other full size strobe products do.
voltages:
12-48 & 72-125 volts DC multi-voltage
all colors,
dimensions H 7-1/2", Dia. 7-1/2"
SAE J1318 class 2/3 single flash
SAE J1318 class 1/2/3 double & quad flash
Options:
closed bottom,
conduit mount,
line cord,
single or double flash,
magnet mount
The model 200R is a low profile strobe with molded rubber base to absorb shock and prevent corrosion - good for high vibration.
Plolycaronate snap-in lens.
Permanent or magnetic mount (stainless steel mounting hardware)
Fully encapsulated circuitry.
voltages:
Multi voltage, 12 to 48VDC with a min. 1 amp, max. 3 amp draw
colors, amber, red, blue, green, clear, magenta
dimensions H 7-1/2", Dia. 7-1/2"
The model 200Z projects a powerful 4 joule flash that can be seen for great distances. It's small size (h 4-1/8" by 4"dia.) makes it ideal for use on tow motors and other small vehicles. With the optional magnetic mount and cigarette lighter cord the 200ZM makes a great portable warning light. The 200Z is completely corrosion and weather proof. The plastic Lexan(R) lens is sealed to the die cast base with a neoprene gasket providing a superior enclosure. The 200Z mounts to any flat surface using rubber expansion plugs (supplied) or it can be screwed onto any 1/2" NPT conduit or pipe mount.
The model 400A is our top line rotating light for the automotive market. The dual 35 watt sealed beams produce excellent, sharp flashes of light with the redundancy of two bulbs. The base is spun from 0.080" aluminum and anodized. Mounting to any flat surface is simple via two threaded rods and toggle bolts (supplied).
Specifications:
available in 12 & 24 VDC ,
amber, blue, clear, green, red,
dimensions H 7-3/4", Dia. 8-11/16",
draws 6.5 amps @ 12 VDC,
corrosion proof, anodized aluminum housing,
surface mount
The model 747 is the thickest case in the industry.
Damage-resistant reputation
provides years of service even through severe climate conditions and abuse.
Encapsulated circuits are weather and moisture resistant.
Solid state design prevents vibration-caused damage.
Operates on standard 6 volt spring terminal batteries.
Flash rate: 65 fpm
LED models available.
The model 737S is an economical flashing incandescent light.
Conveniently portable with
Durable Lexan lens on a high-impact safety orange plastic case.
Maximum 360 degree visibility.
Under 2 lbs. (less batteries).
Operates on 2 standard 6 volt spring-terminal batteries
Flash rate: 65 fpm
The model 1185H/878 is a high bright halogen flashing light with dual mirrors.
The model 201ZMV is a durable low profile strobe light with a polycarbonate base. It has an easy replacement snap on lens with O-ring. Voltages for this strobe is 12 to 80 volts making this light suitable for forklights, small service vehicles or any other applications that require a low profile light.
Like all above products, the electronic components in these lights are completely encapsulated in a hard epoxy resin. This provides excellent protection in corrosive and high vibration environments. The power supply is protected against reverse polarity with a user replaceable, 5 amp standard automotive fuse.
**NEW** LED Stiks 7720-LED, 7798-LED
Mobile on-site traffic directing LED Stik,
Microprocessor controlled with tactile front,
Varying flash patterns: left arrow, right arrow, center-out and alternating,
Extruded aluminium with 1/4" mounting grooves on top, bottom and back for easy mounting of additional products,
Polycarbonate shield
Product Specifications
12VDC with 1 am draw maximum,
Standard 15' cable,
Standard 373/4" and 48" lengths,
Custom lengths of cable and extrusions available, call Brite-Lite for details,
7720: 11/2" tall by 11/2" deep 4.15 lbs (less cable),
7798: 25/8" tall by 11/2" deep 4.7 lbs (less cable
|
|
9400 Series Strobe & Rotating Light Bars
Custom built to your specifications, these quality light bars will last through years of rough service. Sizes range from 36 to 69 inches. You have your choice of 360 degree or unidirectional strobes, rotators, stop-tail-turn, take down lights, diamond or V mirrors, alley lights, alternating lights and more. Outer domes may be clear or coloured. Inner lens may be clear or coloured. Even rotators may have coloured filters. Mounting may be direct bolt or gutter mount. The light bar base is a heavy, anodized aluminum extrusion incorporating T slots for 5/16 carriage bolts to facilitate mounting. Domes are though poly carbonate and sealed to the base with a sponge rubber O ring. All hardware is stainless steel.
Feel free to discuss your custom bar requirements with our knowledgeable sales people.
7:30 am to 4:45 pm, (M-F, MST)
| |
|
|
