Evolve™ LED Streetlight – ERL1 / ERL2

Product ID: ERL1 / ERL2

The Evolve™ LED Streetlight is optimized for customers requiring a basic LED solution for local and collector roadways. GE's unique reflective optics are designed to optimize application efficiency and minimize glare. The modern design incorporates the heat sink directly into the unit for heat transfer to prolong LED life. This reliable unit has a 50,000 hour rated life, significantly reducing maintenance needs and expense over the life of the fixture. This efficient solution lowers energy consumption compared to traditional HID fixture for additional operating cost savings.

• Designed to meet recommended luminance and illuminance requirements for local and collector roadway / street classifications.

• The modern design incorporates Casting-integral heatsink for maximum heat transfer.
• Meets 3G vibration standards per ANSI C136.31-2010.
• Metal door.

• Structured LED array for optimized roadway photometric distribution.
• Evolve™ light engine consisting of reflective technology designed to optimize application efficiency and minimize glare.
• Utilizes high brightness LEDs, 70 CRI at 3000K & 4000K typical.
• LM-79 tests and reports are performed in accordance with IESNA standards.

• UL/ULC listed, suitable for wet locations per UL 1598.
• IP65 rated optical enclosure per ANSI C136.25-2009.
• Temperature rated at –40° to 40°C.
• Upward Light Output Ratio (ULOR) = 0.
• Compliant with the material restriction requirements of RoHS.

• 2 or 4 Bolt Slipfitter with +/- 5 degree of adjustment for leveling.
• Integral die cast mounting pipe stop feature.
• Adjustable for 1.25 in. or 2 in. mounting pipe.

• Corrosion resistant polyester powder painted, minimum 2.0 mil. thickness.
• Standard colors: Black and Gray.
• RAL & custom colors available.

• 120-277 volt and 347-480 volt.
• System power factor is >90% and THD <20%.*
• Class "A" Sound rating.
• Surge Protection per ANSI C136.2-2014:
  • Standard: 6kV/3kA “Basic”
  • Optional: 10kV/5kA “Enhanced”
• Photo electric sensors (PE) available for all voltages.

*System THD <26% for 347/480V supply with A7 power level

• Projected L87 (10K) ≥ 50,000 at Ta 25C
  (Power Levels: A7, B7, C7).
• Projected L90 (16K) ≥ 50,000 at Ta 25C
  (Power Levels: D3, E3).
• Projected L70 (10K) > 100,000 at Ta 25C.